Festo AG & Co. KG
4827505
counter module
CPX-E-1CI
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Dimensions W x L x H | 18,9 mm x 76,6 mm x 124,3 mm |
| Grid dimension | 18,9 mm |
| No. of inputs | 4 |
| Diagnostics via LED | Encoder supply error Error per module Encoder error Encoder normal operation Encoder supply normal operation Status per channel |
| Diagnostics via bus | Measuring system error Short circuit/overload in sensor supply Parameter error Monitoring of wire break Monitoring of zero pulse Monitoring of tracking error |
| Module parameters | Signal type/encoder type Signal evaluation Monitoring of cable break Monitoring of tracking error Monitoring of zero pulse Pulse/zero pulse Latch signal Latch event Latch response Upper count limit Lower count limit Load value Debounce time for digital inputs Integration time for speed measurement Internal Revision ID |
| Channel parameters | Signal extension |
| Input debounce time | 0,02 ms 0,1 ms 3 ms |
| Protection (short circuit) | Internal electronic fuse protection per module |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 15 mA |
| Max. residual current inputs per module | 1,8 A |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Power failure buffering | 10 ms |
| Electrical isolation channel – internal bus | No |
| Electrical isolation channel – channel | No |
| Switching level | Signal 0: <= 5 V Signal 1: >= 11 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Power supply, function | Encoder supply |
| Power supply, type of connection | Terminal strip |
| Power supply, connection technology | Cage clamp terminal |
| Power supply, number of pins/wires | 6 |
| Power supply, conductor diameter | 0,2 - 1,5 mm2 |
| Power supply, note on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without wire end sleeves |
| Authorisation | RCM Mark |
| CE mark (see declaration of conformity) | to EU directive for EMC |
| Vibration resistance | Transport application test at severity level 1 in accordance with FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 in accordance with FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance classification CRC | 0 - No corrosion stress |
| Storage temperature | -20 - 70 °C |
| Relative air humidity | 95 % non-condensing |
| Protection class | IP20 |
| Ambient temperature | -5 - 50 °C |
| Note on ambient temperature | -5 - 60°C for vertical installation |
| Product weight | 88 g |
| Maximum address volume for outputs | 2 Byte |
| Maximum address volume for inputs | 12 Byte |
| Input characteristics | to IEC 61131-2, type 3 |
| Input circuit logic | PNP (positive-switching) 2-wire sensors to IEC 61131-2 3-wire sensors to IEC 61131-2 |
| Electrical connection, input, function | Digitaleingang |
| Electrical connection, input, connection type | 2x terminal strips |
| Electrical connection, input, connection technology | Cage clamp terminal |
| Electrical connection, input, number of pins/wires | 6 |
| Electrical connection for input, conductor cross section | 0,2 - 1,5 mm2 |
| Electrical connection for input, note on conductor cross section | 0.2 - 2.5 mm² for flexible conductors without wire end sleeves |
| Electrical connection for input 2, function | Counter input |
| Electrical connection for input 2, connection type | Terminal strip |
| Electrical connection for input 2, connection technology | Cage clamp terminal |
| Electrical connection for input 2, number of pins/wires | 6 |
| Electrical connection for input 2, connection pattern | 00995848 |
| Electrical connection for input 2, conductor cross section | 0,2 - 1,5 mm2 |
| Electrical connection for input 2, note on conductor cross section | 0.2 - 2.5 mm² for flexible conductors without wire end sleeves |
| Mounting type | with top-hat rail |
| Materials note | Contains PWIS substances Conforms to RoHS |
| Material housing | PA |
© 2020 Festo AG & Co. KG