Festo AG & Co. KG
4080497
bus module
CPX-E-PN
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Dimensions W x L x H | 42,2 mm x 125,8 mm x 76,5 mm |
| Grid dimension | 18,9 mm |
| Diagnostics via LED | Force mode Network errors Network status port 1 Network status port 2 Power supply electronics/sensors Power supply load System error Maintenance required |
| Diagnostics via bus | Wire break Short circuit PROFIsafe addresses different parameterisation error Upper limit value not observed Overtemperature Lower limit value not observed Undervoltage |
| Configuration support | GSDML file |
| Max. no. of modules | 10 |
| System parameters | Diagnostic memory Fail-safe reaction Force mode System start |
| Module parameters | Channel alarms bundling Undervoltage diagnostics Channel alarms undervoltage Process value representation of analogue modules |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 75 mA |
| Max. power supply | 8 A |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Power failure buffering | 20 ms |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Power supply, function | Electronics and sensors |
| Power supply, type of connection | Terminal strip |
| Power supply, connection technology | Cage clamp terminal |
| Power supply, number of pins/wires | 4 |
| Power supply, conductor diameter | 0,2 - 1,5 mm2 |
| Power supply, note on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without wire end sleeves |
| Authorisation | RCM Mark |
| CE mark (see declaration of conformity) | to EU directive for EMC |
| Vibration resistance | Transport application test at severity level 1 in accordance with FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 in accordance with FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance classification CRC | 0 - No corrosion stress |
| Storage temperature | -20 - 70 °C |
| Relative air humidity | 95 % non-condensing |
| Protection against direct and indirect contact | Protective extra-low voltage with safe disconnection (PELV) |
| Protection class | IP20 |
| Ambient temperature | -5 - 50 °C |
| Note on ambient temperature | -5 - 60°C for vertical installation |
| Product weight | 145 g |
| Maximum address volume for outputs | 64 Byte |
| Note on outputs | 62 bytes with I/O diagnostic interface 64 bytes with status bits 64 bytes without diagnostics |
| Maximum address volume for inputs | 64 Byte |
| Note on inlets | 62 bytes with I/O diagnostic interface 62 bytes with status bits 64 bytes without diagnostics |
| Fieldbus interface, electrical isolation | Yes |
| Fieldbus interface, transmission rate | 100 Mbit/s |
| Fieldbus interface | Ethernet |
| Fieldbus interface, type of connection | 2x socket |
| Fieldbus interface, connection technology | RJ45 |
| Fieldbus interface, number of pins/wires | 8 |
| Fieldbus interface, protocol | PROFINET IRT PROFINET RT |
| Fieldbus interface, max. address volume for inputs | 64 Byte |
| Fieldbus interface, max. address volume for outputs | 64 Byte |
| Mounting type | with top-hat rail |
| Materials note | Contains PWIS substances Conforms to RoHS |
| Material housing | PA |
© 2020 Festo AG & Co. KG