Festo AG & Co. KG
2900543
electrical interface
CPX-CTEL-2-M12-5POL-LK
More detailed information about this product!
Festo Data sheet
Criterion | Feature |
Dimensions W x L x H | (including interlinking block) 50 mm x 107 mm x 55 mm |
Diagnosis | Communication error Short circuit module Module-oriented diagnostics Undervoltage |
Parameters configuring | Diagnostics behaviour Fail-safe mode per channel Forcing per channel Idle mode per channel Module parameter |
Control elements | DIL switches |
LED displays | PS: electronics supply power, sensor supply power PL: load supply X1: system status IO-Link port 1 X1: system status IO-Link port 2 Group diagnostics |
Operating voltage range DC | 18 - 30 V |
Intrinsic current consumption at operating voltage | Typ. 65 mA |
Nominal operating voltage DC | 24 V |
Power failure buffering | 10 ms |
Electrical isolation channel – internal bus | Yes, for intermediate supply |
Electrical isolation channel – channel | No |
Corrosion resistance classification CRC | 1 - Low corrosion stress (when installed) |
Storage temperature | -20 - 70 °C |
Protection class | IP65 IP67 |
Ambient temperature | -5 - 50 °C |
Product weight | 110 g |
Maximum address volume for outputs | 32 Byte |
Maximum address volume for inputs | 32 Byte |
Protocol | IO-Link |
IO-Link, protocol | Master V 1.0 |
IO-Link, communication mode | COM1 (4,8 kBaud), COM2 (38,4 kBaud), COM3 (230,4 kBaud) |
IO-Link, port type | A B |
IO-Link, number of ports | 2 |
IO-Link, process data width OUT | Parameterisable 4/4 to 16/16 bytes |
IO-Link, process data width IN | Parameterisable 4/4 to 16/16 bytes |
IO-Link, minimum cycle time | Min. 1 ms per 1 byte of process data |
IO-Link master, output current | 1,6 A PL / Port 1,6 A PS / Port |
Max. line length | 20 m |
Electrical connection | 2x socket M12 5-pin A-coded |
Materials note | Conforms to RoHS |
Material housing | PA-reinforced PC |
© 2020 Festo AG & Co. KG