Festo AG & Co. KG
1971599
output module
CPX-FVDA-P2
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Dimensions W x L x H | (incl. interlinking block and connection technology) 50 mm x 107 mm x 55 mm |
| No. of outputs | 2 |
| Diagnosis | Wire break per channel Short circuit/overload per channel Cross circuit Undervoltage, valves |
| Parameters configuring | Diagnostics behaviour Monitoring wire break/channel |
| Safety function | Safely switching off supply voltage for the valves |
| Safety Integrity Level (SIL) | Safe switch-off/SIL 3 |
| Performance level (PL) | Category 3 safety component, performance level e |
| LED displays | 1 fail-safe mode protocol active 1 group diagnostics 3 channel diagnostics 3 channel status |
| Protection (short circuit) | Internal electronic fuse protection per channel |
| Intrinsic current consumption at operating voltage | Typically 25 mA (power supply for electronics) Typically 65 mA (load voltage supply for valve) |
| Load capacity against functional earth | 400 nF |
| Max. reaction time to switch-off command | F_WD_TIME + 23 ms |
| Max. power supply per channel | 1,5 A |
| Max. resultant current per module | 5 A |
| Nominal operating voltage DC | 24 V |
| Electrical isolation channel – internal bus | Yes, for intermediate supply |
| Electrical isolation channel – channel | No |
| Residual ripple | 2 Vpp within voltage range |
| Voltage drop per channel | 0,6 V |
| Permissible voltage fluctuation | -15 % / +20 % |
| Authorisation | c UL us - Recognized (OL) |
| CE mark (see declaration of conformity) | to EU directive for machinery |
| Certificate issuing department | TÜV Rheinland 01/205/5294.01/18 |
| Corrosion resistance classification CRC | 1 - Low corrosion stress (when installed) |
| Storage temperature | -20 - 70 °C |
| Protection class | Depending on the connection block |
| Ambient temperature | -5 - 50 °C |
| Note on ambient temperature | Observe derating curve for pneumatic interface |
| Probability of Failure per Hour in [1/h]. | 1,00000000E-09 |
| Product weight | 50 g |
| Maximum address volume for outputs | 6 Byte |
| Note on outputs | 2 external outputs 1 internal channel to switch off the valve voltage |
| Maximum address volume for inputs | 6 Byte |
| Max. line length | 200 m |
| Switching logic, outputs | PM switching |
| Materials note | Conforms to RoHS |
| Material housing | PA-reinforced PC |
© 2020 Festo AG & Co. KG