Festo AG & Co. KG
1387363
input module
CTSL-D-16E-M8-3
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Dimensions W x L x H | 143 mm x 103 mm x 32 mm |
| Polarity protected | for operating voltage |
| Protection (short circuit) | Internal electronic fuse protection for each group |
| Baud rate | 38,4 kbit/s, 230,4 kbit/s |
| Operating voltage range DC | 18 - 30 V |
| Input debounce time | 3 ms (0.5 ms, 10 ms, 20 ms, parameterisable) |
| Max. resultant current per module | 1,2 A |
| Maximum number of inputs | 16 |
| Nominal operating voltage DC | 24 V |
| Electrical isolation channel – channel | No |
| Switching level | Signal 0: <= 5 V Signal 1: >= 11 V |
| Current consumption at nominal operating voltage, logic | <= 35 mA |
| Authorisation | RCM Mark |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | to EU directive for EMC |
| Corrosion resistance classification CRC | 2 - Moderate corrosion stress |
| Storage temperature | -20 - 70 °C |
| Protection class | IP65 IP67 |
| Ambient temperature | -5 - 50 °C |
| Product weight | 250 g |
| Protocol | I-Port IO-Link |
| IO-Link, connection technology | Device, 5-pin |
| IO-Link, protocol | Device V 1.0 |
| IO-Link, communication mode | COM2 (38,4 kBaud), COM3 (230,4 kBaud) |
| IO-Link, port type | B |
| IO-Link, number of ports | 1 |
| IO-Link, process data width IN | 2 Byte |
| IO-Link, minimum cycle time | Device 3,2 ms |
| Input characteristics | IEC1131-T2 |
| Input circuit logic | PNP (positive-switching) |
| Electrical connection | 16x socket M8 3-pin |
| Bus-specific LED display | X20: I-Port / IO-Link |
| Product-specific LED display | 1 PS operating voltage electrical 16 channel status 2 group diagnostics |
| Mounting type | Optional with through hole with top-hat rail |
| Materials note | Conforms to RoHS |
| Material cover | PA-reinforced |
| Material housing | PA-reinforced |
© 2020 Festo AG & Co. KG