Festo AG & Co. KG
576046
input/output module
CPX-2ZE2DA
More detailed information about this product!
Festo Data sheet
Criterion | Feature |
Dimensions W x L x H | (incl. interlinking block and connection technology) 50 mm x 107 mm x 50 mm |
Grid dimension | 50 mm |
No. of outputs | 2 |
No. of inputs | 2 |
Diagnosis | Operating mode-dependent diagnostics |
Parameters configuring | Switch-on/off delay Frequency output Speed measurement Pulse output Pulse train Rotational speed measurement Frequency measurement Cycle duration measurement Engine operating mode Determination of position Pulse width modulation One-off counting Continuous counting Periodic counting |
LED displays | 1 group diagnostics 10 channel status 2 module diagnostics 2 channel diagnostics |
Input debounce time | 0.1 µs (0.2 µs, 0.4 µs, 0.8 µs, 1 µs, 2 µs, 4 µs, 8 µs, 10 µs, 50 µs, 100 µs, 500 µs, 1 ms, 3 ms, 10 ms, 20 ms parameterisable) |
Protection (short circuit) | Internal electronic fuse protection per channel |
Operating voltage range DC | 18 - 30 V |
Intrinsic current consumption at operating voltage | Type 35 mA |
Max. power supply per channel | 5 A adjustable (20 W lamp load) |
Max. residual current outputs per module | 10 A |
Max. residual current inputs per module | 2 A |
Nominal operating voltage DC | 24 V |
Electrical isolation channel – internal bus | Outputs - Yes, when using an intermediate supply |
Electrical isolation channel – channel | No |
Switching level | Signal 0: <= 5 V Signal 1: >= 11 V |
Authorisation | UL - Recognized (OL) |
Corrosion resistance classification CRC | 1 - Low corrosion stress (when installed) |
Storage temperature | -20 - 70 °C |
Protection class | IP65 IP67 |
Ambient temperature | -5 - 50 °C |
Product weight | 130 g |
Characteristic curve, outputs | IEC1131-T2 |
Input characteristics | Per IEC 1131-2, type 02 |
Max. line length | 30 m |
Input circuit logic | PNP (positive-switching) |
Switching logic, outputs | NPN (negative switching) PNP (positive-switching) Push-pull driver |
Materials note | Conforms to RoHS |
Material housing | Plastic |
© 2020 Festo AG & Co. KG