Festo AG & Co. KG
567347
control block
CPX-CEC-C1
Modular controller Codesys V2.3, Ethernet, CAN.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Dimensions W x L x H | 50 mm x 107 mm x 55 mm |
| Device-specific diagnostics | Channel and module-oriented diagnostics Undervoltage/short circuit of modules Diagnostics memory |
| CPU data | 32 MB Flash 32 MB RAM 400 MHz processor |
| Configuration support | CODESYS V2.3 |
| Parameters configuring | CODESYS V2.3 |
| Total number of axes | 31 |
| Additional functions | Diagnostics functions Motion function for electric drives |
| Control elements | DIL switch for CAN terminating plug Rotary switch for run/stop |
| Programming, operating language | DE, EN |
| Programming, file handling support | Yes |
| Baud rate | 10/100 bit/s per IEEE 802.3 (10BaseT) or 802.3u (100BaseTx) |
| Processing time | Approx. 200 µs/1 k instruction |
| Intrinsic current consumption at operating voltage | Typically 85 mA |
| IP address selection | DHCP Via CoDeSys Via MMI |
| Functional modules | Read CPX module diagnosis CPX diagnosis status Copy CPX diagnosis trace And others |
| Flags | 30 kB retentive data 8 MB global data memory CoDeSys variable concept |
| Nominal DC operating voltage, load voltage | Without pneumatics: 18 to 30 V 24 V With Midi/Maxi type pneumatics: 21.6 to 26.4 V With CPA type pneumatics: 20.4 to 26.4 V With MPA type pneumatics: 18 to 30 V |
| Nominal operating voltage DC | 24 V |
| Power failure buffering | 10 ms |
| Programming software | CODESYS provided by Festo V2.3 |
| Programming language | To IEC 61131-3 Ladder diagram (LDR) Statement list (STL) Structured text Function chart Sequential function chart Additional CFC |
| Program memory | 4 MB user program |
| Corrosion resistance classification CRC | 2 - Moderate corrosion stress |
| Storage temperature | -20 - 70 °C |
| Relative air humidity | 95 % non-condensing |
| Protection class | IP65 IP67 |
| Ambient temperature | -5 - 50 °C |
| Product weight | 155 g |
| Ethernet, number | 1 |
| Ethernet, data transmission speed | 10/100 Mbit/s |
| Ethernet, supported protocols | TCP/IP, EasyIP, Modbus TCP |
| Ethernet, connector plug | RJ45 Socket 8-pin |
| Fieldbus interface, electrical isolation | Yes |
| Fieldbus interface, transmission rate | 125, 250, 500, 800, 1000kbit/s Adjustable via software |
| Fieldbus interface, connection technology | Plug Sub-D 9-pin |
| Fieldbus interface | CAN-Bus |
| Protocol | CODESYS Level 2 EasyIP Modbus TCP TCP/IP |
| Control interface | CAN-Bus |
| Ethernet interface | RJ 45 (socket, 8-pin) |
| Bus-specific LED display | TP: Link/Traffic |
| Product-specific LED display | ERR: PLC run-time error M= modify / forcing active PL: load supply PS: Electronics supply, sensor supply RUN: PLC Status SF: system error STOP: PLC status |
| Materials note | Conforms to RoHS |
| Material housing | PA-reinforced PC |
© 2020 Festo AG & Co. KG