Festo AG & Co. KG
550908
feed separator
HPV-10-10-A
Integrated SME-8-.../ SMT-8-... sensors. Optimised, accurate adaptation option with ZBH centring sleeves.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Stroke | 10 mm |
| Piston diameter | 10 mm |
| Max. replacement accuracy | 0,3 mm |
| Max. stem backlash Sx | 0,05 mm |
| Max. stem backlash Sz | 0,03 mm |
| Max. angular gripper jaw backlash ax | 0,12 deg |
| Max. angular gripper jaw backlash ay | 0,2 deg |
| Max. angular gripper jaw backlash az | 0,262 deg |
| Mounting of external fingers | Through-hole |
| Cushioning | No cushioning |
| Assembly position | Any |
| Mode of operation | double-acting |
| Design structure | twin piston Piston rod Stopper Non-rotating |
| Position detection | For proximity sensor |
| Half pulse | 26,5 ms |
| Protection against torque/guide | Square guide |
| Cycle time | 52,5 ms |
| Operating pressure | 3 - 8 bar |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC | 2 - Moderate corrosion stress |
| Ambient temperature | 5 - 60 °C |
| Max. force on finger Fz static | 75 N |
| Max. torque at gripper finger Mr static | 3 Nm |
| Max. torque at finger Mx static | 3 Nm |
| Max. torque at finger My static | 3 Nm |
| Theoretical force at 6 bar, return stroke | 35 N |
| Theoretical force at 6 bar, advance stroke | 45 N |
| Max. ground per external gripper finger | 56 g |
| Product weight | 135 g |
| alternative connections | M3 |
| Mounting type | Optional Internal thread and centring sleeve With through-hole and centring sleeve |
| Pneumatic connection | M5 |
| Materials note | Free of copper and PTFE Conforms to RoHS |
© 2020 Festo AG & Co. KG