Festo AG & Co. KG
195754
output module
CPX-4DA
for modular electrical terminal CPX, 4 digital outputs.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Dimensions W x L x H | (incl. interlinking block and connection technology) 50 mm x 107 mm x 50 mm |
| No. of outputs | 4 |
| Diagnosis | Short circuit/overload per channel Undervoltage, outputs |
| Parameters configuring | Fail-safe mode per channel Forcing per channel Idle mode per channel Behaviour after short circuit Module monitoring |
| LED displays | 1 group diagnostics 4 channel diagnostics 4 channel status |
| Protection (short circuit) | Internal electronic fuse protection per channel |
| Operating voltage range DC | 18 - 30 V |
| Intrinsic current consumption at operating voltage | Typically 16 mA |
| Max. power supply per channel | 1 A (24 W lamp load) |
| Max. residual current outputs per module | 4 A |
| Nominal operating voltage DC | 24 V |
| Electrical isolation channel – internal bus | Yes, for intermediate supply |
| Electrical isolation channel – channel | No |
| Corrosion resistance classification CRC | 1 - Low corrosion stress (when installed) |
| Storage temperature | -20 - 70 °C |
| Protection class | Depending on the connection block |
| Ambient temperature | -5 - 50 °C |
| Product weight | 42 g |
| Characteristic curve, outputs | Based on IEC1131-T2 |
| Switching logic, outputs | PNP (positive-switching) |
| Material housing | PA-reinforced PC |
© 2020 Festo AG & Co. KG