Festo AG & Co. KG
8087171
end plate
VMPAL-EPL-AP
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Position of connection | on top |
| Polarity protected | Yes |
| Diagnostics via LED | Diagnostics per module Power supply load |
| Diagnostics per internal communication | Electronics/sensors overvoltage Electronics/sensors undervoltage |
| Max. number of valve positions | 32 |
| Valve terminal structure | Valve sizes can be mixed |
| Max. number of solenoid coils | 32 |
| Dimensions W x L x H | 43,1 mm x 107,5 mm x 50,2 mm |
| Protection (short circuit) | Internal electronic fuse protection per channel |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 30 mA |
| Intrinsic current consumption at nominal operating voltage load | Typically 15 mA |
| Max. power supply | 2 x 4 A (external fuse required) |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Nominal operating voltage, DC outputs | 24 V |
| Power failure buffering | 10 ms |
| Electrical isolation of outputs between channel - internal communication | Yes |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Permissible voltage fluctuations, load | ± 10 % |
| Power supply, function | Incoming electronics/sensors and load |
| Power supply, type of connection | Plug |
| Power supply, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Power supply, number of pins/wires | 4 |
| Power transmission, function | Outgoing electronics/sensors and load |
| Power transmission, connection type | Plug socket |
| Power transmission, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Power transmission, number of pins/wires | 4 |
| Authorisation | RCM Mark |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | to EU directive for EMC |
| Corrosion resistance classification CRC | 3 - High corrosion stress |
| PWIS conformity | VDMA24364-B1/B2-L |
| Storage temperature | -40 - 70 °C |
| Relative air humidity | 5 - 95 % non-condensing |
| Protection against direct and indirect contact | Protective extra-low voltage with safe disconnection (PELV) Protection by safety extra-low voltage (SELV) |
| Protection class | IP65 IP67 |
| Note on degree of protection | in assembled condition Unused connections sealed |
| Ambient temperature | -5 - 50 °C |
| Nominal altitude of use | <= 2000 m NHN |
| Max. tightening torque | 1,7 Nm |
| Product weight | 194 g |
| Max. line length | 50 m system communication |
| Communication interface, function | System communication XF10 IN / XF20 OUT |
| Communication interface, connection type | 2x socket |
| Communication interface, connection technology | M8x1, D-coded to EN 61076-2-114 |
| Communication interface, number of pins/wires | 4 |
| Communication interface, protocol | AP-COM |
| Communication interface, screening | Yes |
| Mounting type | Tie rod |
| Materials note | Conforms to RoHS |
| Material housing | Die-cast aluminium, painted PA-reinforced |
| Material threaded sleeve | Nickel-plated brass |
© 2022 Festo AG & Co. KG