Festo AG & Co. KG
8086608
PROFIBUS interface
CPX-AP-I-PB-M12
More detailed information about this product!
Festo Data sheet
Criterion | Feature |
Dimensions W x L x H | 45 mm x 170 mm x 35 mm |
Diagnostics via LED | Buffer error LED (BF) Diagnostics per module Power supply electronics/sensors Power supply load System diagnostics Maintenance required |
Diagnostics via bus | Load switch-off Load overvoltage Load undervoltage Electronics/sensors overvoltage Electronics/sensors undervoltage APDD invalid Communication to AP module interrupted |
Configuration support | Device database file |
Polarity protected | Yes |
Max. no. of modules | 56 |
Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 80 mA |
Intrinsic current consumption at nominal operating voltage load | Typical 5 mA |
Note regarding operating voltage | SELV/PELV fixed power supplies required Note voltage drop |
Max. power supply | 2 x 4 A (external fuse required) |
Nominal operating voltage DC for electronics/sensors | 24 V |
Nominal operating voltage, DC outputs | 24 V |
Power failure buffering | 10 ms |
Permissible voltage fluctuations for electronics/sensors | ± 25 % |
Permissible voltage fluctuations, load | ± 25 % |
Power supply, function | Incoming electronics/sensors and load |
Power supply, type of connection | Plug |
Power supply, connection technology | M8x1, A-coded to EN 61076-2-104 |
Power supply, number of pins/wires | 4 |
Power transmission, function | Outgoing electronics/sensors and load |
Power transmission, connection type | Plug socket |
Power transmission, connection technology | M8x1, A-coded to EN 61076-2-104 |
Power transmission, number of pins/wires | 4 |
Authorisation | RCM Mark |
KC mark | KC-EMV |
CE mark (see declaration of conformity) | to EU directive for EMC |
UKCA marking (see declaration of conformity) | To UK instructions for EMC |
Corrosion resistance classification CRC | 1 - Low corrosion stress |
Storage temperature | -40 - 70 °C |
Relative air humidity | 5 - 95 % non-condensing |
Protection class | IP65 IP67 |
Note on degree of protection | Unused connections sealed |
Ambient temperature | -20 - 50 °C |
Product weight | 186 g |
Maximum address volume for outputs | 244 Byte |
Maximum address volume for inputs | 244 Byte |
Fieldbus interface, electrical isolation | Yes |
Fieldbus interface, transmission rate | 9,6 kbit/s 19,2 kbit/s 93,75 kbit/s 187,5 kbit/s 500 kbit/s 1,5 Mbit/s 3 Mbit/s 6 Mbit/s 12 Mbit/s |
Fieldbus interface | PROFIBUS |
Max. line length | 50 m system communication |
Fieldbus interface, type of connection | Plug |
Fieldbus interface, connection technology | M12x1, B-coded to EN 61076-2-101 |
Fieldbus interface, number of pins/wires | 5 |
Fieldbus interface, protocol | PROFIBUS DP-V1 |
Fieldbus interface 2, connection type | Plug socket |
Fieldbus interface 2, connection technology | M12x1, B-coded to EN 61076-2-101 |
Fieldbus interface 2, number of pins/wires | 5 |
Fieldbus interface 2, function | Bus connection outgoing |
Fieldbus interface 2, type | PROFIBUS |
Fieldbus interface 2, protocol | PROFIBUS DP-V1 |
Fieldbus interface 2, galvanic isolation | Yes |
Fieldbus interface 2, transmission rate | 1,5 Mbit/s 12 Mbit/s 187,5 kbit/s 19,2 kbit/s 3 Mbit/s 500 kbit/s 6 Mbit/s 9,6 kbit/s 93,75 kbit/s |
Communication interface, function | System communication: XF20 OUT / XF21 OUT |
Communication interface, connection type | 2x socket |
Communication interface, connection technology | M8x1, D-coded to EN 61076-2-114 |
Communication interface, number of pins/wires | 4 |
Communication interface, protocol | AP-COM |
Communication interface, screening | Yes |
Note regarding fieldbus interface | Terminating resistor at socket possible |
Mounting type | On H-rail with accessories with through hole |
Materials note | Conforms to RoHS |
Material housing | PA PC Nickel-plated die-cast zinc |
Material o-ring | FPM |
© 2022 Festo AG & Co. KG