Festo AG & Co. KG
8086603
digital input/output module
CPX-AP-I-4DI4DO-M12-5P
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Dimensions W x L x H | 30 mm x 170 mm x 35 mm |
| No. of outputs | 4 |
| No. of inputs | 4 |
| Diagnostics via LED | Diagnostics per module Power supply load Status per channel |
| Diagnostics per internal communication | Load switch-off Short-circuit/overload output signal Short circuit/overload in sensor supply Electronics/sensors overvoltage Load overvoltage Electronics/sensors undervoltage Load undervoltage |
| Polarity protected | Yes |
| Fuse protection of inputs (short circuit) | Internal electronic fuse protection per module |
| Fuse protection of outputs (short circuit) | Internal electronic fuse protection per channel |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Type 35 mA |
| Intrinsic current consumption at nominal operating voltage load | Typical 10 mA |
| Input debounce time | 0,1 ms 3 ms 10 ms 20 ms |
| Note regarding operating voltage | SELV/PELV fixed power supplies required Note voltage drop |
| Max. power supply | 2 x 4 A (external fuse required) |
| Max. power supply per channel | 0,5 A |
| Max. residual current outputs per module | 2 A |
| Max. residual current inputs per module | 1,8 A |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Nominal operating voltage, DC outputs | 24 V |
| Power failure buffering | 10 ms |
| Electrical isolation of inputs between channels | No |
| Electrical isolation of inputs between channel - internal communication | Yes |
| Electrical isolation of outputs between channels | No |
| Electrical isolation of outputs between channel - internal communication | Yes |
| Switching level | Signal 0: <= 5 V Signal 1: >= 11 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Permissible voltage fluctuations, load | ± 25 % |
| Output delay with resistive load | Signal change 0->1: < 200 µs Signal change 1->0: < 200 µs |
| Power supply, function | Incoming electronics/sensors and load |
| Power supply, type of connection | Plug |
| Power supply, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Power supply, number of pins/wires | 4 |
| Power transmission, function | Outgoing electronics/sensors and load |
| Power transmission, connection type | Plug socket |
| Power transmission, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Power transmission, number of pins/wires | 4 |
| Authorisation | RCM Mark |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | to EU directive for EMC |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| Corrosion resistance classification CRC | 1 - Low corrosion stress |
| Storage temperature | -40 - 70 °C |
| Relative air humidity | 5 - 95 % non-condensing |
| Protection class | IP65 IP67 |
| Note on degree of protection | Unused connections sealed |
| Ambient temperature | -20 - 50 °C |
| Product weight | 129 g |
| Characteristic curve, outputs | to IEC 61131-2, type 0.5 |
| Input characteristics | to IEC 61131-2, type 3 |
| Max. line length | 30 m outputs 30 m inputs 50 m system communication |
| Note on max. cable length | Power supply according to nominal voltage |
| Switching logic, outputs | PNP (positive-switching) |
| Input circuit logic | PNP (positive-switching) 2-wire sensors to IEC 61131-2 3-wire sensors to IEC 61131-2 |
| Communication interface, function | System communication XF10 IN / XF20 OUT |
| Communication interface, connection type | 2x socket |
| Communication interface, connection technology | M8x1, D-coded to EN 61076-2-114 |
| Communication interface, number of pins/wires | 4 |
| Communication interface, protocol | AP-COM |
| Communication interface, screening | Yes |
| Electrical connection, input, function | Digitaleingang |
| Electrical connection, input, connection type | 2x socket |
| Electrical connection, input, connection technology | M12x1, A-coded in accordance with EN 61076-2-101 |
| Electrical connection, input, number of pins/wires | 5 |
| Electrical connection, output, function | Digitalausgang |
| Electrical connection, output, connection type | 2x socket |
| Electrical connection, output, connection technology | M12x1, A-coded in accordance with EN 61076-2-101 |
| Electrical connection, output, number of pins/wires | 5 |
| Mounting type | On H-rail with accessories with through hole |
| Materials note | Conforms to RoHS |
| Material housing | PA PC Nickel-plated die-cast zinc |
| Material o-ring | FPM |
© 2022 Festo AG & Co. KG