Festo AG & Co. KG
8086601
digital input/output module
CPX-AP-I-4DI4DO-M8-3P
More detailed information about this product!
Festo Data sheet
Criterion | Feature |
Dimensions W x L x H | 30 mm x 170 mm x 35 mm |
No. of outputs | 4 |
No. of inputs | 4 |
Diagnostics via LED | Diagnostics per module Power supply load Status per channel |
Diagnostics per internal communication | Load switch-off Short-circuit/overload output signal Short circuit/overload in sensor supply Electronics/sensors overvoltage Load overvoltage Electronics/sensors undervoltage Load undervoltage |
Polarity protected | Yes |
Fuse protection of inputs (short circuit) | Internal electronic fuse protection per module |
Fuse protection of outputs (short circuit) | Internal electronic fuse protection per channel |
Intrinsic current consumption at nominal operating voltage for electronics/sensors | Type 35 mA |
Intrinsic current consumption at nominal operating voltage load | Typical 10 mA |
Input debounce time | 0,1 ms 3 ms 10 ms 20 ms |
Note regarding operating voltage | SELV/PELV fixed power supplies required Note voltage drop |
Max. power supply | 2 x 4 A (external fuse required) |
Max. power supply per channel | 0,5 A |
Max. residual current outputs per module | 2 A |
Max. residual current inputs per module | 1,8 A |
Nominal operating voltage DC for electronics/sensors | 24 V |
Nominal operating voltage, DC outputs | 24 V |
Power failure buffering | 10 ms |
Electrical isolation of inputs between channels | No |
Electrical isolation of inputs between channel - internal communication | Yes |
Electrical isolation of outputs between channels | No |
Electrical isolation of outputs between channel - internal communication | Yes |
Switching level | Signal 0: <= 5 V Signal 1: >= 11 V |
Permissible voltage fluctuations for electronics/sensors | ± 25 % |
Permissible voltage fluctuations, load | ± 25 % |
Output delay with resistive load | Signal change 0->1: < 200 µs Signal change 1->0: < 200 µs |
Power supply, function | Incoming electronics/sensors and load |
Power supply, type of connection | Plug |
Power supply, connection technology | M8x1, A-coded to EN 61076-2-104 |
Power supply, number of pins/wires | 4 |
Power transmission, function | Outgoing electronics/sensors and load |
Power transmission, connection type | Plug socket |
Power transmission, connection technology | M8x1, A-coded to EN 61076-2-104 |
Power transmission, number of pins/wires | 4 |
Authorisation | RCM Mark |
KC mark | KC-EMV |
CE mark (see declaration of conformity) | to EU directive for EMC |
UKCA marking (see declaration of conformity) | To UK instructions for EMC |
Corrosion resistance classification CRC | 1 - Low corrosion stress |
Storage temperature | -40 - 70 °C |
Relative air humidity | 5 - 95 % non-condensing |
Protection class | IP65 IP67 |
Note on degree of protection | Unused connections sealed |
Ambient temperature | -20 - 50 °C |
Product weight | 129 g |
Characteristic curve, outputs | to IEC 61131-2, type 0.5 |
Input characteristics | to IEC 61131-2, type 3 |
Max. line length | 30 m outputs 30 m inputs 50 m system communication |
Note on max. cable length | Power supply according to nominal voltage |
Switching logic, outputs | PNP (positive-switching) |
Input circuit logic | PNP (positive-switching) 2-wire sensors to IEC 61131-2 3-wire sensors to IEC 61131-2 |
Communication interface, function | System communication XF10 IN / XF20 OUT |
Communication interface, connection type | 2x socket |
Communication interface, connection technology | M8x1, D-coded to EN 61076-2-114 |
Communication interface, number of pins/wires | 4 |
Communication interface, protocol | AP-COM |
Communication interface, screening | Yes |
Electrical connection, input, function | Digitaleingang |
Electrical connection, input, connection type | 4x socket |
Electrical connection, input, connection technology | M8x1, A-coded to EN 61076-2-104 |
Electrical connection, input, number of pins/wires | 3 |
Electrical connection, output, function | Digitalausgang |
Electrical connection, output, connection type | 4x socket |
Electrical connection, output, connection technology | M8x1, A-coded to EN 61076-2-104 |
Electrical connection, output, number of pins/wires | 3 |
Mounting type | On H-rail with accessories with through hole |
Materials note | Conforms to RoHS |
Material housing | PA PC Nickel-plated die-cast zinc |
Material o-ring | FPM |
© 2022 Festo AG & Co. KG