Festo AG & Co. KG
4080492
digital input module
CPX-E-16DI
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Dimensions W x L x H | 18,9 mm x 76,6 mm x 124,3 mm |
| Grid dimension | 18,9 mm |
| No. of inputs | 16 |
| Diagnostics via LED | Error per module Status per channel |
| Diagnostics via bus | Short circuit/overload in sensor supply |
| Module parameters | Short circuit diagnostics for sensor supply Behaviour after short circuit/overload Input debounce time Signal extension time |
| Channel parameters | Signal extension |
| Input debounce time | 0,1 ms 3 ms 10 ms 20 ms |
| Protection (short circuit) | Internal electronic fuse protection per module |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 15 mA |
| Max. residual current inputs per module | 1,8 A |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Electrical isolation channel – internal bus | No |
| Electrical isolation channel – channel | No |
| Switching level | Signal 0: <= 5 V Signal 1: >= 11 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Authorisation | RCM Mark c UL us - Listed (OL) |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | to EU directive for EMC |
| Certificate issuing department | UL E239998 |
| Vibration resistance | Transport application test at severity level 1 in accordance with FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 in accordance with FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance classification CRC | 0 - No corrosion stress |
| Storage temperature | -20 - 70 °C |
| Relative air humidity | 95 % non-condensing |
| Protection class | IP20 |
| Ambient temperature | -5 - 50 °C |
| Note on ambient temperature | -5 - 60°C for vertical installation |
| Product weight | 102 g |
| Maximum address volume for inputs | 2 Byte |
| Input characteristics | to IEC 61131-2, type 3 |
| Input circuit logic | PNP (positive-switching) 2-wire sensors to IEC 61131-2 3-wire sensors to IEC 61131-2 |
| Electrical connection, input, function | Digitaleingang |
| Electrical connection, input, connection type | 8x terminal strips |
| Electrical connection, input, connection technology | Cage clamp terminal |
| Electrical connection, input, number of pins/wires | 6 |
| Electrical connection for input, conductor cross section | 0,2 - 1,5 mm2 |
| Electrical connection for input, note on conductor cross section | 0.2 - 2.5 mm² for flexible conductors without wire end sleeves |
| Mounting type | with top-hat rail |
| Materials note | Contains PWIS substances Conforms to RoHS |
| Material housing | PA |
© 2022 Festo AG & Co. KG